Lowest Price Guaranteed
Brian Crower Performance Parts

Toyota 1JZGTE CAMSHAFTS

The 2.5L Toyota 1JZ engine platform was produced from 1990 to 2007 (still in current production in the Mark II BLIT Wagon as the 1JZGE). Cylinder bore is 86mm x 71.5mm stroke. The 1JZGTE employs twin CT12A turbochargers from the factory, blowing through a side-mounted air-to-air intercooler. Features 8.5:1 compression, OEM power output is pegged at 280HP at 6200 rpm. The early 1JZGTE's are most commonly available with an auto tranny, but a 5 speed manual version was available in the Supra 2.5L GT. Yamaha is believed to have had a hand in the development and/or production of the engines, specifically cylinder head design. In the following year (1991), the 1JZ-GTE was slotted into the all-new Soarer GT. Output remained at 206kW/363Nm and, again, most examples come tied to an auto trans. These 1JZ-GTE powered Soarers are quite common on the Australian market (as 'grey' imports).

Toyota 1JZGTE CAMSHAFTS
Stage Description Part# Adv. Dur. Dur @ .050 Lift (in) Lift (mm) Kit# Dyno Price Shop Status
stage2.png Street/Strip Specification
Plug and play application. Short duration for nice street manners, slight lope at idle. Excellent all purpose spec. OEM spring OK.
BC0331 264°/264° 218°/218° .344"/.344" 8.74/8.74 BC0300   $572.16
In Stock
stage3.png Race Specification
Longer duration profile, added rpm potential. Intended for fully built engine. Tuning and ECU mods recommended. Requires kit BC0300.
BC0332 272°/272° 229°/231° .375"/.380" 9.52/9.65 BC0300   $572.16
In Stock
usa.png 1JZ Stock       In Stock
The 3rd gen 1JZ-GTE's introduced in 1996 feature Toyota's VVT-i technology. These cams are not VVT-i compatible.Bucket Diameter: 1.200"